Chemides Pulver — concentrate for high-level sterilization of instruments.

Chemi-pharm concentrate-powder Chemides pulver 1000g, which is intended for high-level sterilization of instruments and at the same time an economical product, 1000g of which lasts for a long time.

The powder is diluted with water and the finished solution can be used during the working day.

CHEMIDES POWDER is a hygroscopic powder that dissolves completely in water. During dissolution, active oxygen is released from the powder, and together with the activator, peracetic acid is also formed, due to which the product has very strong disinfecting properties. The powder is safe for the environment as it decomposes into water and oxygen.

CHEMIDES PULVER has sporicidal, virucidal (including hepatitis B and C, HIV), bactericidal (including Gram positive and Gram negative bacteria, acid-fast bacilli, the causative agent of tuberculosis) and fungicidal effects.

The activated CHEMIDES PULVER solution is clear and transparent, allowing the instruments to be cleaned to be monitored as they are processed. The solution is allowed to stand for 15 minutes for activation.

CHEMIDES POWDER is compatible with all major medical equipment materials used in hospitals and healthcare facilities.Not suitable for use on copper, tin, bronze, brass and aluminum surfaces.

The finished solution can be stored in a closed container throughout the working day. According to the contamination of the solution, change the solution before a new work cycle or at least once a day.

DOSAGE:

To prepare the working solution of CHEMIDES PULVER, the powder is dissolved in water.

To prepare one liter of solution, add 17.5 grams of powder (one measuring spoon or 1 packet in one liter of tap water).

USE:

Cleaning and disinfection of instruments, equipment and surfaces

Add 17.5g of CHEMIDES PULVER per liter of lukewarm (30-50C) tap water
Stir the solution until most of the powder has dissolved (2-3 minutes).
Let the solution stand for 15 minutes to achieve the effectiveness of the finished solution
Cover surfaces with solution or place instruments in solution
Treat the surfaces with the working solution using the wiping, spraying or wet cleaning method
The duration of action of the solution is 15 minutes
At the end of the action time, rinse the instruments with running water or sterile water as needed.
Change the prepared solution according to contamination once a day or after each work cycle

Follow the device manufacturer’s instructions when using the disinfectant

Chemical sterilization of instruments

Clean instruments or medical supplies
Add 17.5g of CHEMIDES POWDER for every liter of lukewarm (30-50 C) tap water
Stir the solution until most of the powder has dissolved (2-3 minutes).
Let the resulting solution stand for 30 minutes to achieve the effectiveness of the finished solution
Place previously cleaned instruments in the solution for 15 minutes
Rinse with sterile water
Change the prepared solution according to contamination once a day or after each work cycle

Avoid soiling the disinfected instruments after removing them from the solution. When using a disinfectant, follow the manufacturer’s instructions.

CHEMIDES PULVER complies with the following standards:

EN 13727; EN 13624; EN 14561; EN 14562; EN 14348; EN 13704

PRECAUTIONS:

Harmful if swallowed or in contact with skin. Causes severe eye damage.

Do not use to disinfect single-use instruments. Do not use with the following metals: copper, bronze, brass, tin, aluminum, “mild” steel. Read the instrument manufacturer’s user manual before using the product. Do not use in patients. After disinfecting the instrument, rinse with plenty of water. Store the product in its original packaging in a dry and cool place. Close the package after use.
Keep out of the reach of children.

Has CE marking according to the Medical Devices Directive